Other general precautions to take with power tools are:
Never carry tools by the cord.
Belt Sanders
Never yank the cord to disconnect it from the receptacle.
Best Price 3M 81401 3-Inch x 21-Inch Purple Regalite Resin Bond 80 Grit Cloth Sanding Belt - 5 Pack
3M 81401 3-Inch x 21-Inch Purple Regalite Resin Bond 80 Grit Cloth Sanding Belt - 5 Pack Feature
- 5 Belts Per Package
- Cuts faster and lasts longer than conventional glue bond belts
- Features a heat resistant resin adhesive system to aid longevity
- Made with extremely tough and durable aluminum oxide synthetic abrasive
- Use to power sand a wide variety of materials including wood, metal, plastic, and painted surfaces
3M 81401 3-Inch x 21-Inch Purple Regalite Resin Bond 80 Grit Cloth Sanding Belt - 5 Pack Overview
Heavy duty purple sanding belts have resin over resin bonded Regalite ceramic mineral construction gives an aggressive initial cut, consistant cut rate, and a long life. Faster stock removal with less heat and loading. Better leveling with a more uniform finish. Extra heavy Y weight cloth resists tearing. Flush joined belt will run in both directions to increase belt life.Available at Amazon Check Price Now!
Related Products
- Bosch 1274DVS 6.6 Amp 3-Inch by 21-Inch Variable Speed In-Line Belt Sander with Cloth Dust Bag
- 3M 81403 3-Inch x 21-Inch Purple Regalite Resin Bond 120 Grit Cloth Sanding Belt - 5 Pack
- 3M 81399 3-Inch x 21-Inch Purple Regalite Resin Bond 50 Grit Cloth Sanding Belt - 5 Pack
- 3M 81404 3-Inch x 21-Inch Purple Regalite Resin Bond 150 Grit Cloth Sanding Belt - 5 Pack
- Makita 9903 8.8 Amp 3-Inch-by-21-Inch Variable Speed Belt Sander with Cloth Dust Bag
Customer Reviews
*** Product Information and Prices Stored: Jul 31, 2012 10:45:05
Disconnect tools when changing blades, bits, or cutters.
Avoid loose clothing that can get caught in tantalizing parts.
Watch for trip hazards from cords.
Do not use electrical tools in wet or damp locations.
Another prominent aspect of electrical power tools is guarding.
Lack of proper guarding, or improper use of guards is a frequent Osha violation.
Osha's stance on guarding is that any hazardous tantalizing parts of a tool that an employee can come into contact with must be guarded. All tools are required to have guards properly in place when in use except under the following conditions:
When there was no guard artificial for the singular tool.
When the circular blade or grinder wheel is less than 2 inches in diameter (such as a "Dremel" tool, or die-grinder).
When a milling wheel is used inside of an object that surrounds the wheel wholly (such as milling the inside of a steel pipe).
When it is impossible to use a milling wheel with the guard in place due to the configuration of the workpiece.
In the last case, safety flanges (which mount onto the milling wheel) would have to be used with the milling wheel, and the milling wheel artificial for use with safety flanges. In the case of tools which had no guards at the time of manufacture, Osha will not wish guards to be fabricated. Osha will any way wish the use of personal protective equipment by any complex workers.
Interestingly enough, Osha even has requirements for the type of electrical switches used on power tools. Power tools are allowed one of three type of switches.
Drills, symbol drivers, grinders (with wheels larger than 2 inches), disc and belt sanders, saber saws, reciprocating saws and other similar tools shall have the momentary "On-Off" switch. This switch may have the "Lock-On" operate which allows the employee to release with the same trigger finger. Small disc sanders and grinders with wheel less than 2 inches, routers, planers, nibblers, shears, and jigsaws with blade shanks 1/4 inch wide or less may have a safe bet "On-Off" switch. Circular saws, chain saws and percussion tools that cannot be unmistakably held shall have constant-pressure switches that will shut off the power when released.
Naturally some electrical tools are safer than others. Battery-powered tools are intrinsically safe from electrical shock. There are also some low-voltage tools that operate through a transformer, which offers some greater protection, and then the double-insulated tools have an insulated body that offers safety without using the grounding conductor. In any case, Osha would still wish postponement cords to be three-pronged even if used with two-pronged devices since the cords would likely be used later on other tools or equipment.
This is part two of a two part series on Electrical Power Tool Safety.
Electrical Power Tool securityFriends Link : Band Saws Woodworking Tools Milling Machines Heat Guns Soldering Equipment
